Act now to improve feed security on your farm

Act now to improve feed security on your farm

Act now to improve feed security on your farm

 

Daniel Hession - Nutritionist and Technical Manager with Aurivo Agribusiness

April and May are key months to improve feed security on farm. While conversations at the moment are mainly dominated by predictions on milk and beef prices and availability of inputs, it is very important that farmers take whatever steps are feasible for their own farm, to improve the security of their feed stocks for the coming season and next winter. Some modest changes now can add up to significant benefits over time, so plan and act early. In this article we highlight some simple tips to improve the feed security on your farm.

 

  1. Apply fertiliser to boost grass growth 

Sixty five percent of annual grass is grown before the end of June, adequate nitrogen fertiliser is required to achieve the grass growth potential, so we need to act now. Purchase enough fertiliser for silage and for at least one application to grazing ground if you have not done so already. Target applications to fields that will give the best response to N; fields that have predominantly perennial ryegrass, have been recently reseeded, are drier, and have good fertility status. Apply 25 – 35 units of N per acre (depending on demand) as soon as possible. Protected urea is the most cost-effective source of N.

 

  1. Secure sufficient silage stocks

Complete a simple feed budget for next winter comparing projected winter feed demand to planned silage area and feed reserves currently on farm. Ensure to build in a 3-4 week reserve. Check you have closed enough area for silage based on the fodder budget. While fertiliser is expensive it is still vital that farmers spread the required fertiliser to secure sufficient silage stocks to see them through next winter. There is not going to be a huge surplus of silage made this year and so it would be naïve to rely on purchased silage next winter to meet demand. Concentrate prices next winter are going to be high so it is really important that sufficient quantities of quality silage are made this summer. Farms should have 100% of their winter feed requirement secured by mid to late August.

 

  1. Make the best use of slurry

Silage ground that received 3,000 gal/acre of good quality slurry in March or early April should have received all the P and K required for 1st cut silage. Top up chemical N should be spread from 1 week after slurry. An average first cut silage crop needs to receive a total of 80 units of N per acre including slurry. Where slurry has not yet been spread, spreading should be postponed until after first cut when it should be put out on the bare stubble before regrowth starts. If slurry is spread on silage ground late - especially where there is a good cover of grass and if a dry spell occurs - the dry slurry can stay on the grass and cause fermentation problems in the silage. In this case, hold slurry until after the 1st cut has been harvested. Consider using Low Emission Slurry Spreading (LESS) methods to recover more of the N from slurry. Making up feed deficits is harder later in the year as response to fertiliser N is lower than in April and May.

 

  1. Sell unproductive stock

This is not a year for carrying passengers. Suckler cows that have lost a calf, dairy cows with high SCC or low milk yields (use milk recording data), autumn calving cows scanned not in calf and ewes that have no lambs should all be sold as soon as they are fit to do so. For herds breeding their own replacements, be more selective with the number and quality of animals you bring into the herd this year, overall don’t keep any unnecessary or poor performing stock.

 

  1. Aim for high quality silage

Improving silage quality will increase animal performance e.g. milk yield, live weight gain and reduce concentrate feed costs over winter. Do not cut back on fertiliser and rely on delaying the cutting date to make up the yield difference. This will only reduce both the yield and quality of silage for the year. Aim for a late May cut of good quality silage.

 

  1. Grassland management

Graze swards in rotation, aim to have stock in the same field for no more than 5 days, 3 days ideally. This is to protect regrowth’s and maximise growth rates. If stock could be moved to fresh grass twice a week it would be a big improvement, both in terms of animal performance and in the total amount of grass grown in the year. Split larger fields into smaller paddocks. A lot can be achieved with a single line electric fence and a well-placed water trough. Skip heavy covers and cut these as silage.

 

  1. Spread lime where required

Apply lime where required to grazing ground, it will release N and P from the soil. Lime can be spread year-round on grazing ground. Avoid lime on silage ground before harvest, after first cut is a good opportunity.

 

Visit our various social media platforms for additional information and advice or speak to your local Farm Commercial Specialist.

Aurivo Co-Operative Society
Aurivo House, Finisklin Business Park, Sligo, F91 N968

www.aurivo.ie www.nutrias.ie www.homeland.ie